LNS SN542(M9 M10 M17 M25)

Collet Type: Finger Chuck

Inquiry

QUICK DETAILS

1、As feeder fingers: for feeding forward workpiece bars in automatic lathes

2、Custom holes can be made to order, with a full range of specifications available in 0.1mm increments, offering wear resistance and durability.

3、Hardness: Bar loader collet are made from special spring steel. The front component with the clamping bore has a hardness of approx. HRc 60– where this is not prevented by the partial tempering. The thread and spring areas are hardened to spring temper.

4、Bar size：Φ3.0mm～Φ38.0mm

Part No Guide

Part No	Taiwan Grade Code	Clamp size	Outer Dia	Total length	I.D.Thread
PF2060-M9R	42#	16.5～18.0mm	20mm	60mm	M9P1.0
PF2560-M9R		16.5～23.0mm	25mm	60mm	M10P1.0
PF2760-M9R		16.5～23.0mm	27mm	60mm	M10P1.0
PF3270-M9R		16.5～28.0mm	32mm	70mm	M17P1.0
PF3580-M9R		16.5～32.0mm	35mm	80mm	M25P1.5
PF3780-M9R		31.0～34.0mm	37mm	80mm	M25P1.5
PF3880-M9R		31.0～35.0mm	38mm	80mm	M25P1.5
PF4280-M9R		31.5～40.0mm	42mm	80mm	M25P1.5